Blog

This wrought iron railing Project in Calgary, Alberta consisted of railings for an upper deck above a sunroom in my BENT Iron Art design. The wrought iron railing section at the front of the deck was welded to metal posts on each end giving you strength, an elegant look, and ease of installation. The posts are bolted to the deck and the other railings were then attached to the house and to the posts with metal screws. My BENT metal railing design that was used in this wrought iron railing project in Calgary, Alberta is made from 1/2 inch solid…

These wrought iron gate and fence pieces are done in my signature BENT design for a client in Calgary, Alberta. The 10 foot long posts were put in the ground and secured with poured concrete first. Once they were set then the live edge fence and gate were created to fit the spaces. The gate dimensions are 72" high by 42" wide. It has the ability to swing both inside and out. My wrought iron gate and fence BENT design is made from 1/2 inch solid round mild steel and I hand bend it while the steel is cold. Each…

Over the years I have had the pleasure of creating different railing ideas for clients in Canada and the United States. So I went back and gathered images and here are a few of the designs that were created to give you inspiration for your indoor or outdoor projects. Retro Railings Retro Railing Harbour Florida Project This project was for a client who was renovating a home to sell. I provided the client with a few design ideas and my Retro Railing was the winner! It had a classic art deco feel that went with the design of the home.…

In this 5 step stair railing design project we transformed an old style railing into this amazing one of a kind BENT Iron Railing with distressed wood finish. When the client contacted me to go to their home and take a look at their stair railing that they wanted to transform I arrived to find their old railing had golden oak handrail and base and white balusters. Here is what the railings looked like before the stair railing design project began. STEP 1 - we removed the white balusters and pulled out all the nails that held them in place…

These iron stair railing pieces were created for a client in the Spring of 2019. My client chose a square tube for the top rail and a flat steel bottom rail. The purpose of this was to have a substantial looking top rail that would attach to the wood posts and wall. The flat bottom rail sections had holes drilled into the bottom rail after the design was laid out to screw it to the wood trim along the floor. The process for my client was simple from beginning to end. I was provided both the height and length measurement…